tjloha.blogg.se - Using dj controller with deckadance

#USING DJ CONTROLLER WITH DECKADANCE DRIVER#

As the latency is increased the delay between moving a MIDI/interface control and

Latency - This is a working buffer (breathing space) used to avoid CPU overload.

44100 Hz (44.1 kHz) is most common although some interfaces use 48000 Hz (48 kHz).

Sample rate - Select the play-back frequency of your audio interface.

Are you ready to test? Make sure no one has been fiddling with the amplifier volume controls!

Test - Tests the Left and Right channels.

#USING DJ CONTROLLER WITH DECKADANCE DRIVER#

PC users: We recommend using the ASIO4ALL driver if you don't have specific hardware in mind.

device - Selects your soundcard/audio & driver.PC: ASIO or Direct Sound (ASIO recommenced). Audio device type - Select the audio driver type.The options that show in the INPUT/OUTPUT drop down menus above depend on the audio interface/s connected to your computer. Windows users can use ASIO4ALL while OSX, Mac users can use the Aggregate DeviceĮditor. NOTE: With the ability to use of 5 pairs of audio inputs and 6 pairs of outputs, you may find it useful to aggregate the inputs/outputs from several audio interfaces in Deckadance. Surround-sound audio interfaces, for example, will have a pair of rear-speaker outputs that can be used for the Monitor mix. NOTE: In order to set a separate headphone (Cue) mix, you need to have an audio interface with, at least, two pairs of stereo outputs, one for the Monitor (headphone mix) and oneįor the Master (main mix). it is strongly recommended that you select an ASIO driver (ASIO4ALL for example) as Deckadance will run more smoothly with ASIO. Inputs are used to accept control signals from vinyl/CDJs and from microphones for PA (Public Address). In order to get the best out of Deckadance, you may need to take some time to familiarize yourself with the Audio options.ĭeckadance uses both audio inputs and outputs. NOTE: Audio Settings are accessed from the Tool Bar. To open the Setup Function Window, click on the preferences icon located on the tool-bar at the top of the main interface.